Price: 84,97 €
(as of Nov 20, 2023 15:11:09 UTC – Details)
Product Description
G217 is a transparent (slightly blue), non-yellowing hard resin. The mechanical properties of G217 prints are similar to tough thermoplastic materials. After sanding the lamination on the surface of the prints, they will become completely clear.
The wavelength range is 385-405nm, suitable for traditional LCD/MSLA/DLP 3D printers.
Clear raw materials
The raw materials of G217 resin are all clear and transparent. RESION strictly controls the production process and does not remain any impurities in the raw materials. After sanding and spraying clear paint or G217 resin, the print will become completely transparent (slightly bluish).
Does not yellow
Regular resin will slowly turn yellow over time, but G217 resin does not. G217 prints may yellow after post-print curing, but it will disappear in a few days until clear color is restored.
Robust like ABS
The mechanical properties of G217 resin prints are similar to tough thermoplastic materials, with high tensile strength and excellent impact resistance. Prints can be reworked multiple times.
G217 Transparent resistant resin
Cleaning and post-curing
Cleaning tools: soft brush or 2 in 1Wash Cure Machine or ultrasonic cleaner. Cleaning time: 2 minSolvent for cleaning: 95% ethanol or post-curing gloss: 385-405 nm UV (40 W) Post-curing time: 2-4 minutes
Print Settings
Layer height: 0.05mm. Lower exposure time: 30-55 seconds. Normal exposure time: 2.3-13.4 seconds
Mechanical properties Layer height: 0.05 mm Shore hardness: 90D HDTHDT(0.455MPa): 65 °C Tensile strength: 65.3 MPa Flexural strength: 77.3 MPa Notched IZOD: 30.78 J/ m Elongation at break: 10.4% Viscosity (25 ℃): 396 mpa.s
Attention :
G217 liquid is transparent but slightly bluish. The surface of the 3D printed parts will have layered patterns, making them semi-transparent printed parts. If you need it to be completely transparent, you need to polish the lines on the surface of the print and spray a clear coating over it. Do not put prints in water or humid environment. Do not apply too much force to the prints immediately after post-print curing, it will take several hours before the prints reach the mechanical properties they should have.
Precautions
Use :
1. Operating temperature: 20~35℃,68℉~95℉
2. Shake well before each use. If the resin is very viscous, preheat the bottle with hot water to 80°C before shaking.
3. Wear nitrile rubber gloves during operation and keep the operating environment well ventilated.
4. Do not use resin near windows, balconies or other environments with strong ultraviolet rays.
5. If resin accidentally gets into eyes, mouth or nose, rinse immediately with plenty of water and seek medical attention.
6. Resin remaining on the skin can be washed off with soap, hand sanitizer, etc.
Waste liquid:
1. If the resin is no longer needed, pour it into a transparent container (pour a small amount at a time), then place it in the sun to cure it completely.
2. If it is a cleaning fluid containing resin, do not drain it directly into the drain. You can put the cleaning solution in the sun first, wait until the resin inside is completely solidified and precipitated, then filter the solid residue, and the filtered cleaning solution can be used continuously.
Warehouse :
1. Store in a closed, shaded and cool place.
2. Keep away from fire.
3. Keep out of reach of children.
4. If it is not necessary to use the resin within 1 day, pour it into a clean, light-protected container and keep it tightly closed. Do not mix the printed resin liquid with unused resin to avoid contamination of the new resin.
Features: Flexible resin Flexible resin Elastic resin Resistant resin Resistant resin Resistant resin color black white black Gray white black Shore hardness 60 ~ 75 A 60 ~ 75 A 50-60 A 87D 86D 82D Viscosity (25 ℃) 1250 mpa.s 1250 mpa. s 2300 mpa.s 307 mpa.s 307 mpa.s 307 mpa.s Tensile strength 7.9 MPa 7.9 MPa 3.8 MPa 52.3 MPa 54.3 MPa 48.5 MPa Elongation at break 255 .1% 255.1% 159% 12.3% 13.9% 16.8%
【Won’t yellow】Ordinary resin will slowly turn yellow over time, but G217 resin will not. G217 prints may yellow after post-print curing, but it will disappear in a few days until clear color is restored.
【Tough Like ABS】The mechanical properties of G217 resin prints are similar to tough thermoplastic materials, with high tensile strength and excellent impact resistance. Prints can be reworked multiple times.
【Mixing with F69/F39/F39T】K/M58/M68/G217 tough resin can be mixed with F69/F39/F39T resin, which can make the printed parts stronger, more durable and not fragile for a long time.
【Wide Adaptability】Designed for 385~405nm UV LED light source, it is suitable for major LCD/MSLA/DLP resin 3D printers on the market.
' rel='nofollow'> À propos
Laisser un commentaire